Adding one other SATA drive is a quick & basic procedure even for those who have very little experience of computer hardware and it is a great way to increase the storage capacity with the computer but without the complexity of cloning ones existing drive or being required to worry about re-installing your existing OS.
You must ensure you computer contains a spare 3. 5" drive bay to accommodate the new drive, your motherboard carries a spare SATA connector plus your PSU contains a free power connector to help power the excess drive in the system. Before removing your new hard generate from its protective anti-static wrapping ensure that you have attached your anti-static wristband (this is very important as hard disks are particularly sensitive to help electro-static being let go, commonly called ESD). Observe that orientation to your existing storage device and ensure that your brand-new drive is actually inserted inside same route.
The next thing will involve you pushing in both the SATA together with power connectors into the new storage device. The SATA cord (likely red in colour) can have the exact same L-shaped connection at either ends and you have got to connect the following first to the drive, then secondly to your spare SATA connector on the mainboard. Now you have got to attach a SATA power connector from your DL360 G1 powersupply so as to power this drive.
Plug your laptop or computer into that mains together with power with as normal. The plus side to SATA drives is that do not need set up any master/slave settings and also the motherboard should instantly recognise the fresh device. When Windows has loaded click into "My Computer" and be sure that the drive is detected with the system and that the perfect drive capacity is that it is reported.
Following that tutorial and installing one other harddisk is a sensible way to increase the storage capacity to your machine and hopefully you've got found this a very painless process. Installing seagate sata 150 is really easy and is usually accomplished in a matter of minutes.
You must ensure you computer contains a spare 3. 5" drive bay to accommodate the new drive, your motherboard carries a spare SATA connector plus your PSU contains a free power connector to help power the excess drive in the system. Before removing your new hard generate from its protective anti-static wrapping ensure that you have attached your anti-static wristband (this is very important as hard disks are particularly sensitive to help electro-static being let go, commonly called ESD). Observe that orientation to your existing storage device and ensure that your brand-new drive is actually inserted inside same route.
The next thing will involve you pushing in both the SATA together with power connectors into the new storage device. The SATA cord (likely red in colour) can have the exact same L-shaped connection at either ends and you have got to connect the following first to the drive, then secondly to your spare SATA connector on the mainboard. Now you have got to attach a SATA power connector from your DL360 G1 powersupply so as to power this drive.
Plug your laptop or computer into that mains together with power with as normal. The plus side to SATA drives is that do not need set up any master/slave settings and also the motherboard should instantly recognise the fresh device. When Windows has loaded click into "My Computer" and be sure that the drive is detected with the system and that the perfect drive capacity is that it is reported.
Following that tutorial and installing one other harddisk is a sensible way to increase the storage capacity to your machine and hopefully you've got found this a very painless process. Installing seagate sata 150 is really easy and is usually accomplished in a matter of minutes.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.